Product ID:27-A, WALLHIDE LINE SEMI GLOSS
MSDS Date:03/10/1992
FSC:8010
NIIN:00N027809
MSDS Number: BMXNN

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

FILM FORMERS, RESINS & ADDITIVES

Fraction By Weight: 30-35%

DURING WELDING OR FLAME CUTTING ON SURFACES WITH

RTECS: 9999999ZZ

HYDROTREATED HEAVY NAPHTHA

CAS: 64742-48-9

Fraction By Weight: 35-40%

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 2-5%

CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 20-25%

OSHA PEL 15MG/M3 TDUST;5RDUST

ACGIH TLV: 10MG/M3 TDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 25-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL. EYE:CAUSE
IRRIT. REDNESS, ITCH, BURNING SENSA & VISUAL DISTURBS MAY INDICATE
EXCESS CONT. SKIN:MAY CAUSE MOD IRRIT. DRYNESS, ITCH, CRACK, BURN,
REDNESS & SWELL ARE CNDTNS A SSOC W/EXCESS CONT. INHAL:VAP & SPRAY
MIST MAY BE HARMFUL. CHRONIC:AVOID LONG TERM & RPTD CONT. PROD
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CONTAINS ING 3. ANIMALS INHAL MASSIVE
QTYS OF ING 3 DUST IN LONG-TERM STUDY DEVEL LUNG TUMORS. STUDIES
W/HUMANS INVOLVED IN MFR OF PIGMENT INDICATE NO INCR RISK OF CANCER
FROM EXPOS. POTNTL F OR INHAL OF ING 3 DUSTS FROM COATINGS IS VERY
LTD. SINCE OVEREXP ARE NOT EXPECTED, THERE IS NO SIGNIFICANT HAZ
FOR MAN.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF H*2O
FOR @ LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF H*2O, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & H*2O IF MATL APPEARS TO ADHERE TO
SKIN. I NHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP & OTHER
SUPPORTIVE MEASURES AS REQD. OTHER:IF ANY TYPE OF OVEREXP/SYMPS OF
OVEREXP OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CTL CTR, EMER
ROOM/MD(SUPDAT)

Flash Point Method:PMCC
Flash Point:120F,49C
Lower Limits:0.7%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CO*2, DRY CHEM/UNIVERSAL
AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS II
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. H*2O SPRAY MAY BE INEFT. H*2O SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT POSS AUTOIGNIT/EXPLO (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSOR B MATL & PLACE INTO CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS II COMBUST
LIQS. CNTNRS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING MIXT
MAY HAVE HAZ OF ALL OF ITS PARTS. AVOID FREE FALL OF LIQS IN EXCESS
OF A FEW INCHE S.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE SUITABLE
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS Protective Gloves:NITRILE RUBBER/NEOPRENE RUBBER GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:COMBUST LIQ FIRES. FIRE FIGHT PROC:WHEN EXPOS TO EXTREME
HEAT. IF H*2O IS USED, FOG NOZZ ARE PREF. EXPLO HAZ:SURFS. TOX
GASES MAY FORM WHEN PROD IS CONTACTED BY FLAME/HOT SURFS. HAZ DECOM
P PROD:INCL:CO, ZINC OXIDE. FIRST AID PROC:IMMED; HAVE MSDS INFO
AVAIL. VENT:

HCC:F4
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<1
Vapor Density:HVR/AIR
Spec Gravity:1.1-1.3
Evaporation Rate & Reference:12 (BUOAC=100)
Solubility in Water:0%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS.
Percent Volatiles by Volume:<55

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPDAT)

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE & LOCAL ENVIRON CONTROL REGULATIONS. EMPTY CNTNRS SHOULD BE
RECYCLED OR DISPOSED OF THRU APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.